Center Certification & Testing International
Project Introduction
The waterproof test is applicable to electrical and electronic products that may be subjected to flushing during transportation, storage or use. This water comes from heavy rain, wind and rain, sprinkler systems, wheel splashes, flushing or violent waves. The relevant specifications should specify whether the electrical and electronic products must work normally during the test, or whether they can only withstand the flushing conditions and remain intact.
For portable, outdoor and automotive electronics, there are waterproof test requirements, whether it is IEC, MIL or ETSI and SAE in the world have developed corresponding test requirements.
waterproof level
IEC/EN60529 waterproof is divided into 9 levels (level 0 ~ level 8), waterproof level (e.g.IPX4-waterproof level 4):
Level 0: Completely waterproof and unprotected
Level 1: Water dripping vertically should have no harmful effects
Level 2: When the vertical surface of the shell is inclined within 15°, the vertical dripping should have no harmful effects
Level 3: Water is sprayed within 60° of each vertical plane without harmful effects
Level 4: Splashing water in all directions of the housing without harmful effects
Level 5: No harmful effects by spraying water in all directions
Level 6: Strong water spray in all directions of the shell without harmful effects
Level 7: After being immersed in water of specified pressure for a specified period of time, the amount of water in the shell will not reach harmful levels
Level 8: According to the conditions agreed by the manufacturer and the user (should be harsher than Level 7), the water intake of the shell after continuous diving will not reach harmful levels
GCC certification is a mandatory certification system implemented by the Gulf Cooperation Council (GCC) for products entering the markets of its member countries, aiming to ensure that products meet regional unified technical specifications and safety standards. It is mainly applicable to the seven Gulf countries, namely the Kingdom of Saudi Arabia, the United Arab Emirates, Kuwait, Qatar, the Republic of Yemen, the Kingdom of Bahrain and Oman.
BSCI certification is an abbreviation of BusinessSocialComplianceInitiative, and Chinese is called business social standard certification. BSCI is an organization that advocates the business community to abide by social responsibility. At the same time, it is a non-profit organization.
CMA, the name is \"China Metrology Accreditation\", the abbreviation of \"China Metrology Accreditation\" in English. According to the provisions of Article 22 of the Metrology Law of the People’s Republic of China: “The product quality inspection agency that provides notarized data to the society must be evaluated by the metrological administrative department of the people’s government at or above the provincial level for the capability and reliability of metrological verification and testing. Qualified.\"
The waterproof test is applicable to electrical and electronic products that may be subjected to flushing during transportation, storage or use. This water comes from heavy rain, wind and rain, sprinkler systems, wheel splashes, flushing or violent waves.
Get a quote
Tik Tok
